Resmed AirCurve 10 VAuto Key features
Technical Specification
| Brand | ResMed |
| Model | AirCurve 10 Vauto |
| Usage/Application | Hospitals & Personal Use |
| Pressure Range (cm H2O) | S, VAuto: 2 to 25 cm H2O (2 to 25 hPa); CPAP: 4 to 20 cm H2O (4 to 20 hPa) |
| Ramp Rate (mins) | 5 to 45 minutes |
Additional Details
| Pressure Sensor | Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) |
| Power Supply Unit | 90 W, AC input range:100–240 V, 50–60 Hz 1.0–1.5 A, Class II 115 V, 400 Hz 1.5 A, Class II (nominal for aircraft use); DC output:24 V 3.75 A |
| Flow Sensor | Internally located at device inlet, digital mass flow type, -70 to +180 L/min |
General System
| Weight With Humidifier | 1248 gm |
| Dimensions | 205 x 150 x 116 mm (without humidifier), 255 x 150 x 116 gm (with humidifier) |
| Warranty | 2 Years |
Comfort Features
| Operating Temperature | +5°C to +35°C Note: The airflow for breathing produced by this therapy device can be higher than the temperature of the room. Under extreme ambient temperature conditions (40°C) the device remains safe. |
| Operating Altitude | Sea level to 2591 m; air pressure range 1013 hPa to 738 hPa |
Sound
| Pressure Level Measured | According to EN ISO 17510-1:2009 (CPAP mode); SlimLine: 26.6 dBA with uncertainty of 2 dBA, Standard: 26.6 dBA with uncertainty of 2 dBA |
| Power Level Measured | According to EN ISO 17510-1:2009 (CPAP mode); SlimLine: 34.6 dBA with uncertainty of 2 dBA, Standard: 34.6 dBA with uncertainty of 2 dBA |
Additional Details
| Operating Mode | S, VAuto, CPAP |
| Housing Construction | Flame retardant engineering thermoplastic |
| Supplemental Oxygen | Maximum flow: 15 L/min (CPAP, S); 4 L/min (VAuto) |
| Standard Air Filter | Material: Polyester non-woven fibre, Average arrestance: >75% for -7 micron dust |
| Hypoallergenic Air Filter | Material: Acrylic and polypropylene fibres in a polypropylene carrier, Efficiency: >98% for:- 7-8 micron dust; >80% for:- 0.5 micron dust |
| Air Outlet | 22 mm |
| Water Capacity | To maximum fill line 380 mL |
| Typical Power Consumption | 53 W (57 VA) |
| Peak Power Consumption | 104 W (108 VA) |
| Maximum Single Fault Steady Pressure | The device will shut down in the presence of a single fault if the steady state pressure exceeds:30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec |
| Wireless Module | Technology used:4G, 2G. It is recommended that the device is a minimum distance of 2 cm from the body during operation. Not applicable to masks, tubes or accessories. Technology may not be available in all regions |
Additional Details
| Design Life | Device, power supply unit – 5 years / Cleanable humidifier – 2.5 years / Air tubing – 6 months |
| Operating Humidity | 10 – 95% relative humidity, non-condensing |
| Storage and Transport Temperature | -20°C to +60°C |
| Storage and Transport Humidity | 5 – 95% relative humidity, non-condensing |
In The Box:
- Resmed AirCurve 10 VAuto Device with HumidAir integrated humidifier
- Water tub
- ClimateLineAir™ Heated Tube
- Power supply unit
- Travel bag
- SD card (already inserted)
Warranty – 3 Years
Frequently Asked Questions (FAQ’s)
Q: What is Resmed Aircurve 10 vauto?
A: The ResMed AirCurve 10 VAuto is a bilevel positive airway pressure (BiPAP) machine used to treat sleep-related breathing disorders, particularly obstructive sleep apnea (OSA). It’s a medical device designed to provide therapy for individuals who experience difficulty breathing during sleep.
Q: How does Resmed Aircurve 10VAuto work?
A: The ResMed AirCurve 10 VAuto is a bilevel positive airway pressure (BiPAP) machine that works by delivering two different levels of air pressure during the breathing cycle to treat sleep-related breathing disorders, such as obstructive sleep apnea (OSA)
When you start using the device, it continuously monitors your breathing patterns and detects any pauses or obstructions in your airway. These pauses often indicate OSA, where the airway becomes partially or completely blocked during sleep. During the inhalation phase of your breathing cycle, the AirCurve 10 VAuto delivers a higher positive airway pressure known as IPAP (Inspiratory Positive Airway Pressure). This increased pressure helps keep your airway open and maintains a continuous airflow into your lungs. The IPAP is set based on the prescription from your healthcare provider, and the device can adjust this pressure dynamically if it’s in “Auto” mode. During the exhalation phase, the machine reduces the pressure to a lower level called EPAP (Expiratory Positive Airway Pressure). The lower EPAP makes it easier to exhale and helps prevent airway collapse when you’re not actively inhaling. The ResMed AirCurve 10 VAuto can automatically adjust the IPAP and EPAP levels as needed throughout the night. This is especially helpful when your breathing patterns change, or you encounter different airway obstruction levels during sleep. The “Auto” mode can adapt to pressure to maintain effective therapy.
Q: What is the price of Resmed Aircurve 10VAuto works?
Ans: The price Of Resmed Aircurve 10v Auto in India Ranges from ₹ 69000 to ₹ 78000 depending upon the accessories provided.
Q: What conditions can Resmed Aircurve 10VAuto treat?
A: The ResMed AirCurve 10 VAuto primarily treats sleep-related breathing disorders, particularly those involving breathing interruptions during sleep. It is a bilevel positive airway pressure (BiPAP) machine designed to provide therapy for the following conditions: Obstructive Sleep Apnea (OSA), Central Sleep Apnea (CSA), and Complex Sleep Apnea Syndrome.
Q: Do I need a prescription for Resmed Aircurve 10VAuto?
A: Yes, It would help if you had a prescription from your doctor to use Resmed Aircurve 10VAuto.
Q: What Modes are available in Resmed Aircurve 10VAuto?
A: S, VAuto, and CPAP are available in Resmed Aircurve 10VAuto.
Q: Is Resmed Aircurve 10VAuto easy to set up and use?
A: Setting up and using the ResMed AirCurve 10 VAuto can be relatively straightforward. Still, it’s essential to follow the guidance provided by a healthcare professional and the instructions in the user manual that comes with the device. Here are the general steps for setting up and using the AirCurve 10 VAuto:
The first step is to obtain a prescription for the device from a healthcare provider, typically after undergoing a sleep study to diagnose your specific condition. Your healthcare provider will determine the appropriate pressure settings (IPAP and EPAP) and other therapy parameters based on your condition and needs. Plug the device into a power source and ensure it’s placed on a stable surface. If your device comes with a humidifier, fill the water chamber with distilled water and attach it to the device. Adjust the humidification settings if necessary. Attach your chosen mask to the tubing. Ensure the mask fits comfortably and creates a proper seal over your nose or nose and mouth, depending on the type of mask. Adjust the headgear and straps to secure the mask in place without over-tightening.
Q: Which masks are compatible with Resmed Aircurve 10VAuto?
A: Full face and Nasal and pillow masks are compatible with Resmed Aircurve 10VAuto.
Q: Can I use Resmed Aircurve 10VAuto during travel?
A: Yes, you can use it during travel as it is easy and safe to carry.
Q: How often should I replace the filters and other parts?
A: At least every six months, you can replace the filters and parts of it.
Q: How do I clean and maintain my Resmed Aircurve 10VAuto?
A: Proper cleaning and maintenance of your ResMed AirCurve 10 VAuto machine, as well as the associated equipment like the mask, tubing, and humidifier, are essential to ensure the device functions effectively and remains hygienic. Here’s a general guide on how to clean and maintain your equipment:
Remove the mask from your face. Disassemble the mask components (cushion, frame, headgear, and other removable parts). Wash the mask cushion and any removable parts with mild, soapy, warm water. Rinse thoroughly and allow them to air dry. Wipe the mask frame and headgear with a damp cloth to remove facial oils or residue. Empty the water chamber and rinse it with warm, soapy water. Rinse the water chamber thoroughly and allow it to air dry. Refill the water chamber with distilled water before using it again.
Q: What data does Resmed Aircurve 10VAuto Records have, and how can I access it?
A: The ResMed AirCurve 10 VAuto records various types of data related to your sleep therapy, and this data can be accessed to monitor and adjust your treatment. The specific data recorded may vary slightly depending on the model and features of your AirCurve 10 VAuto device, but here is a general overview of the common types of data recorded like Usage Data, AHI (Apnea-Hypopnea Index), Leak Data, Pressure Data, Flow Data.
Q: What are the benefits of using Resmed Aircurve 10VAuto?
A: Using the ResMed AirCurve 10 VAuto, a bilevel positive airway pressure (BiPAP) machine, offers several benefits for individuals with sleep-related breathing disorders, such as obstructive sleep apnea (OSA) and other respiratory conditions. Here are some key benefits of using the AirCurve 10 VAuto: effective treatment, customized therapy, auto-adjusting features, and comfortable breathing.
Q: Does Resmed Aircurve 10VAuto come with a warranty?
A: MG Medicare provides you with a 2-year manufacturer’s warranty for Resmed Aircurve 10VAuto.
Q: Can I use Resmed Aircurve 10VAuto for pediatric patients?
Ans;- The ResMed AirCurve 10 VAuto is primarily designed and intended for use by adult patients and is not typically recommended for use in pediatric patients, particularly infants and young children. Pediatric sleep-related breathing disorders and their treatment require specialized equipment and expertise.
Reviews
There are no reviews yet.